The swelling and nutrient release behaviors of a novel hydrogel blend of hydroxypropyl cellulose (HPC), carboxymethyl cellulose (CMC), and sodium alginate (NaAlg) was investigated to determine its applicability as an agricultural soil conditioner. Hydrogel swelling and nutrient release data were obtained over time at varying temperatures and pH conditions. The experimental data were fit into the power law, Tsai and Strieder, and Johansson’s models to determine the kinetic parameters for the swelling behavior and nutrient release. Under the experimental swelling conditions, the maximum and minimum swelling capacities of the hydrogel blend were 322.9245% and 228.0483%, respectively. The data fit to the power law suggested that a pseudo Fickian behavior describes the diffusion mechanism. The data fit to the Tsai and Strieder and Johansson’s models provided the experimental values for the α and temperature correlation as 3.69×10-5 and 0.0278, respectively, which implies that the diffusion behavior within the hydrogel does not vary significantly within the temperature range. Lastly, the inconsistency observed in the nutrient release behaviors at varying pH suggested that additional trials may be required in order to establish a clearer relation between pH and nutrient release behavior.

• Hydrogels ,
• modeling,
• swelling ,
• nutrient release

[1] Neethu, T. M., Dubey, P. K., & Kaswala, A. R. (2018). Prospects and Applications of Hydrogel Technology in Agriculture. International Journal of Current Microbiology and Applied Sciences, 7(5), 3155–3162. https://doi.org/10.20546/ijcmas.2018.705.369

[2] Akalin, G. O., & Pulat, M. (2018). Preparation and Characterization of Nanoporous Sodium Carboxymethyl Cellulose Hydrogel Beads. Journal of Nanomaterials, 2018, 1–12. https://doi.org/10.1155/2018/9676949

[3] Rees, D. A. (1969). Structure, Conformation, and Mechanism in the Formation of Polysaccharide Gels and Networks. In Advances in Carbohydrate Chemistry and Biochemistry (pp. 267–332). https://doi.org/10.1016/s0065-2318(08)60352-2

[4] Clark, A. H., & Ross-Murphy, S. B. (n.d.). Structural and mechanical properties of biopolymer gels. In Biopolymers (pp. 57–192). https://doi.org/10.1007/bfb0023332

[5] Hilmi, B., Hamid, Z. A. A., Akil, H. M., & Yahaya, B. H. (2016). The Characteristics of the Smart Polymers Temperature or pH-responsive Hydrogel. Procedia Chemistry, 19, 406–409. https://doi.org/10.1016/j.proche.2016.03.031

[6] Garduque, R.G., Gococo, B.J., & Yu, C.A. (2019). Synthesis and characterization of sodium carboxylmethyl cellulose/hydroxypropyl cellulose/sodium alginate hydrogel for agricultural water storage and controlled nutrient release. Bachelor of Science in Chemical Engineering: University of the Philippines Diliman.

[7] Ayatullah Hosne Asif, A. K. M., Rahman, M., Sarker, P., Hasan, M. Z., & Paul, D. (2019). Hydrogel Fibre: Future Material of Interest for Biomedical Applications. Journal of Textile Science and Technology, 5(4), 92–107. https://doi.org/10.4236/jtst.2019.54009

[8] Arifuzzaman Md., Wu Z.L., Takahashi R. Kurokawa T. Nakajima T. & Gong J.P. (2013). Geometric and Edge Effects on Swelling-induced Ordered Structure Formation in Polyelectrolyte Hydrogels. Macromolecules 2013, 46,22, 9083-9090. https://doi.org/10.1021/ma401773w

[9] Reddy, S. G., Pandit, A. S., & Thakur, A. (2016). Effects of Crosslink Agents on Sodium Alginate and Lignosulphonic Acid Blends. Polymer Korea, 40(1), 63. https://doi.org/10.7317/pk.2016.40.1.63

[10] Reddy, S. G. & Akanksha, S. P. (2011). Swelling Behavior of Calcium–Ions Crosslinked Bipolymeric Sodium Alginate–Lignosulphonic Acid Blends. International Journal of Polymeric Materials, 60(14), 1123–1129. https://doi.org/10.1080/00914037.2011.553855

[11] Ganji, F., Vasheghani, F. S., & Vasheghani, F. E. (2010). Theoretical description of hydrogel swelling: a review. Iranian Polymer Journal, 19(5), 375-398.

[12] Ritger, P. L., & Peppas, N. A. (1987). A simple equation for description of solute release I. Fickian and non-fickian release from non-swellable devices in the form of slabs, spheres, cylinders or discs. Journal of Controlled Release, 5(1), 23–36. https://doi.org/10.1016/0168-3659(87)90034-4

[13] Abdel-Raouf, M. E., El-Saeed, S. M., Zaki, E. G., & Al-Sabagh, A. M. (2018). Green chemistry approach for preparation of hydrogels for agriculture applications through modification of natural polymers and investigating their swelling properties. Egyptian Journal of Petroleum, 27(4), 1345–1355. https://doi.org/10.1016/j.ejpe.2018.09.002

[14] An, D., Yang, L., Liu, B., Wang, T.-J., & Kan, C. (2017). Diffusion Performance of Fertilizer Nutrient through Polymer Latex Film. Journal of Agricultural and Food Chemistry, 65(50), 10868–10874. doi:10.1021/acs.jafc.7b04225

[15] Anton Paar GmbH (2020). Anton Paar Wiki. Viscosity of Water – viscosity table and viscosity chart. Retrieved from https://wiki.anton-paar.com/en/water/ on 1 June 2020.

[16] Rizwan, M., Yahya, R., Hassan, A., Yar, M., Azzahari, A., Selvanathan, V., Sonsudin F. & Abouloula C. (2017). pH Sensitive Hydrogels in Drug Delivery: Brief History, Properties, Swelling, and Release Mechanism, Material Selection and Applications. Polymers, 9(12), 137. https://doi.org/10.3390/polym9040137

[17] Catoria M. Fusaro L. Fancesco D. Ramella M. & Boccafoschi F. (2019) Overview of natural hydrogels for regenerative medicine applications. Journal of Materials Science. Materials in Medicine 30(10): 115. https://www.ncbi.nlm.nih.gov/pmc/articles/PMC6787111/